Multifunctional DJI Tethered Drone FC30 Carrier Tethered Drone System

DJI Tethered FC30 Carrier Tethered

Onboard Power Supply

• Input Voltage: 580-810 Vdc, wide input range

• Output Voltage: 59 Vdc ±1%, constant regulated output, with voltage customization available

• Output Power: ≥18000W (nominal continuous output), ≥22000W (peak for at least 10s)

• Protection Functions: Input overvoltage and undervoltage protection; output overvoltage, overcurrent, short-circuit, and over-temperature protection

• Isolation Voltage: ≥3000V (Vin-Vout), 1-minute withstand voltage test, leakage current 5mA, no breakdown

• Installation Method: Replaces one drone battery, plug-and-play installation

• Input Connector: LP20 aviation plug

• Output Connectors: Battery interface, XT90, XT60 × 2

• Protection Rating: IP54

• Dimensions: 468 × 308 × 142 ±0.5 mm (excluding handle and connectors)

• Weight: 10.8 ±0.2 kg (replacing a 11.5 kg drone battery)

Tether Cable

• Material: High-temperature-resistant alloy copper wire, composite fluoropolymer insulation layer, high-modulus tensile aviation-grade fiber braided layer

• Current Capacity: 25-30A, internal resistance 1.6 ±0.1Ω (100m @ 20℃ loop)

• Tensile Strength: ≥300 kg, with ≥1000 cycles of repeated reeling/unreeling

• Insulation Strength: ≥3500 Vdc, no breakdown in 1-minute test

• Fiber Optic Communication: The tether cable is a hybrid fiber-optic and electrical cable, containing tight-buffered single-mode fiber, with optional fiber optic communication

• Cable Length: Standard: 220m (4 layers of winding in the box), Optional: 330m (6 layers of winding in the box)

• Outer Diameter: 6.3 ±0.1 mm

• Weight: 44 ±1 g/m

Tether Box

• Input Voltage: 380 ±10% VAC, three-phase five-wire system, frequency 50Hz

• Output Voltage: 600-800 Vdc adjustable (default 800 Vdc at factory)

• Output Power: ≥22000W (nominal continuous output), ≥25000W (peak for at least 30s)

• Reeling Speed: 0-3 m/s, adjustable in steps

• Reeling Tension: 0-20N, adjustable in steps

• Input Connector: Aviation plug

• Tether Output: LP20 aviation plug

• Fiber Optic: FC connector (optional)

• Switches and Buttons: AC switch, high-voltage on/off button, emergency reeling button, backup power switch

• Protection Rating: IPx4

• Dimensions: 600 × 570 × 460 ±0.5 mm (excluding feet and external accessories)

• Weight: 54 ±0.5 kg (excluding tether cable)

Environmental Characteristics

• Ambient Temperature:

  • Operating: -20 to 45°C

  • Storage: -40 to 65°C

• Relative Humidity:

  • Operating: 10 to 80% RH

  • Storage: 5 to 90% RH

• Altitude: ≤3000 m

Packaging and Transportation

• Dimensions: Wheeled flight case: 850 × 740 × 600 ±5 mm (excluding wheels)

• Weight: 115 ±5 kg (including tether box, onboard power supply, accessories, and documents)

Multifunctional DJI Tethered Drone

FC30 Carrier Tethered Drone System

Multifunctional Tethered Drone System

Multifunctional DJI Tethered Drone FC30 Carrier Tethered Drone System Images